Checklists | Checklist End

“blank”

Subpages

Content

Checklist In

## checklist_for_incoming_fpc_and_deck_lead

Add polycorder mount and length strip to length boards

All scales, tablets, and computers are working before leaving the dock Links: Local link

Catch, Haul, and Specimen Apps set up (back up paper forms available)

Check content’s of your vessel’s BCS tool box on arrival or before start of leg. Turning the BCS tool box over to the vessel’s deck crew does not release you from responsibility for the condition of it’s contents

Check FPC filebox or print copies of blank ES60 log forms for skipper: Check FPC filebox or print copies of blank ES60 log forms for skipper Links: Local link

Check glycerin/thymol solution to make sure it is not floculent and has proper dilution and viscosity

Check serial numbers for survival suits and 406MHz EPIRBS

Check survival suit inventory and assign a suitably-sized survival suit to each scientific staff

Check that you have bleach in your inventory for cleaning otolith trays

Check that you have sufficient marking paint in your inventory

Check to see if there is a meter stick for measuring trawl alley catches

Clean bedding for all new scientists

Conduct pre-cruise safety meeting with skipper, scientific staff, and crew in wheelhouse Links: Local link

Configure attachment of net jewelry (see attached picture) Links: Local link

Do practice trawl and fill out Standard Trawing Procedures form Links: Local link

Document vessel ingress and egress

Email RACE Deputy Director that Safety Briefing was completed with list of serial numbers for survival suits and 406MHz EPIRBs

ES60 Calibration (beginning of first leg): ES60 Calibration (beginning of first leg) Links: Local link

Expendable items - always use items with the earliest expiration dates first to prevent waste & save GAP $$

Fill-out ES60 Parameter change form: Fill-out ES60 Parameter change form Links: Local link

Fill-out ES60 Pre-cruise settings sheet: Fill-out ES60 Pre-cruise settings sheet Links: Local link

Flight schedules for scientists Links: Local link

Following the calibration of a vessels ES-60 Simrad sounder the down riggers and appropriate associated gear should be rinsed with freshwater dried and stowed in a dry location.  The “C” clamps provided should be greased or at the very least, oiled to prevent corrosion and seizing of the screw mechanism.

FPC Orientation checklist Links: Local link

Gloves of all sizes required by scientific crew

Have ALL survey and vessel crew watch SEXUAL HARRASSMENT VIDEO Links: Local link

Initialize MK9 light meters and secure one on top of wheelhouse and the other for use on trawl headrope Links: Local link

Install WHEELHOUSE updates (if necessary) Links: Local link

Leg 1 : make sure LW parameters in DATA_ENT program are correct Links: Local link

Make sure new ES60 hard drive was installed for each new leg Links: Local link

Make sure there is back up media: thumb drive, blank CDs for daily backup of bridge and catch computer

Mark trawl wires (first leg) - Step-by-step Wire Marking Protocol Links: Local link

Net Swapping Log Form Links: Local link

OSI 2021 Job Service No’s Links: Local link

Otolith and Specimen Supplies (ethanol, glycerol, otolith trays and vials/caps, tweezers, knives, formalin, buckets, specimen labels, plastic bags)

Pencils and Blank Printer Paper

Provide Fuel PO # and sign and obtain copy of fuel receipt if fuel taken Links: Local link

Record personal survival suit and EPIRB identification numbers on the Safety Briefing form Links: Local link

Refer to net swapping procedure to randomly determine the sequential order of net usage and record on the Net Swapping Log Form. Links: Local link

Review Inter-leg Communication Log prepared by FPC from previous leg (if applicable) Links: Local link

REVIEW INVENTORY LISTS FOR YOUR VESSEL Links: Local link

Safety Leader and FPC conduct pre-cruise safety check Links: Local link

Science personnel by leg and vessel Links: Local link

SEA to DH GBL and Container HAZMAT Decl. Links: Local link

Set Globe program on bridge TO RECORD LOG AND TRACK data Links: Local link

Set up bridge computers according to Marport and Wheelhouse cookbooks Links: Local link

Set up catch entry computer according to "General Catch Data Entry Instructions&quot Links: Local link

Stuff otolith vials with labels (otolithlabels.xls) Links: Local link

Survey map (indicating completed tows & those yet to be completed by vessel) Links: Local link

Provide skipper with most current Globe MARKS files (EBSstations_2020_Marks.mdb, EBS_2019_GOODBAD_MARKS.mdb and EBS_ALL_GOODBAD_MARKS_new.mdb) and copy to vessel C: directory Links: Local link

Provide skipper with most current Globe MARKS files (NBSstations_2020_Marks.mdb, NBS_2019_GOODBAD_MARKS.mdb, NBS_2017_GOODBAD_MARKS.mdb, and NBS_ALL_GOODBAD_MARKS_new.mdb) and copy to vessel C: directory Links: Local link

Provide skipper with most current version of Globe lines files and put in their C: directory (EBSGOODBAD_LINES2020.mdb, EBSGOODBAD_LINES2019.mdb,EBSGOODBAD_LINES2018.mdb, EBSGOODBAD_LINES2017.mdb) Links: Local link